RTS control unit for pergola (3 motors + 1 LED)

This box can incorporate a power supply. It can be used to control up to 3 motors and an LED output.

Intelligent control box for bioclimatic pergola with large adjustable slats. It receives signals from the RTS sensors (wind, rain, frost) and automatically adapts the operation of the pergola depending on climatic conditions, to optimise comfort and protect the installation.

At the same time, the box can be controlled by Somfy RTS remote control or via the Tahoma, with a TaHoma home automation box.

• Control unit and sensors compatible with all SOMFY® RTS control points
• Compatible with BMS, radio and Tahoma home automation systems
• Control of 1 to 3 actuators/actuators
• White and/or RGB LED lighting control
• Accessory controls (heating, etc.)
• Compatible remote controls: Smoove RTS, Situo 1 RTS , Situo 5 RTS.
• Can be pre-wired.

• Power supply 100-240 Vac, 100 W max
• Outputs :
  • 3 motor outputs 12/24 Vdc - 3 A max
  • 1 LED output 12/24 Vdc - 4 A max
• Wired inputs :
  • 1 anemometer
  • 1 temperature sensor
  • 1 rain sensor
  • 4 dry contact controls
• Radio compatibility : RTS
• Operating temperature : -20 °C to +60 °C
• Protection class IP65
• Dimensions (L × W × H) 255 × 205 × 62 mm

Manual mode - sunshine
On sunny days, the user can adjust the slats using the remote control to manage shade, light and solar gain as required.

Automatic mode - climate management

• Rain The slats close automatically to protect the covered area.

• Wind The blades are automatically positioned to limit stress and pressure on the structure.

• Frost The slats open automatically to protect the joints.

• Snow A scenario that can be configured during installation allows you to adapt the behaviour of the slats to protect the pergola or covered area.

At the request of the pergola manufacturer, Noval can adapt its software to meet technical and usage requirements.